Universal Remote Control SP-URC-81-L Uživatelský manuál Strana 11

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 186
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 10
WWW.ONEFORALL.COM 11
Before you start:
- Make sure your original remote control is working correctly.
-
Make sure neither your ONE FOR ALL, nor your original remote control
i
s pointing at your device.
E
xample: To copy the “mono/stereo” function from your original TV
r
emote onto the ”Red”key of your ONE FOR ALL 4.
1
Place both remote controls (the ONE FOR ALL 4 and your
o
riginal) on a flat surface. Make sure the ends which you
normally point at your device are facing each other. Keep
the remotes at a distance of 2 to 5 cm.
2 Press and hold down the MAGIC key
(for approximately 3 seconds) until the
red LED (underneath the TV key
in this example) blinks twice.
The red LED will blink once, then twice.
3 Press 9 7 5 (the red LED will blink twice).
4 Press the device key (on the ONE FOR ALL remote) to
select the mode to which you want to copy the learned
function (Example: TV key).
5 Press the key (on the ONE FOR ALL remote)
where you want to place the learned function
(Example: ”Red” key). The red LED
(underneath the TV key in this example)
will flash rapidly.
6 Press and hold the key (on your original remote) that
you want to copy until the red LED blinks twice
(Example: “mono/stereo” key).
If you want to copy other functions within the same
mode, simply repeat steps 5 and 6 pressing the next key
you want to copy by learning.
7 To exit the learning mode, press and hold down
the MAGIC key until the red LED blinks twice.
- Learning is mode specific. To access your learned function,
press the appropriate device key first.
- The ONE FOR ALL 4 can learn approximately 100 functions.
- You can replace a learned function by placing another learned
function on top.
- Upon changing the batteries, your learned functions will be retained.
The Learning Feature
(
How to copy functions from your original working remote
onto the ONE FOR ALL 4)
Device Type Code
1.__________________________________
2.__________________________________
3.__________________________________
4.__________________________________
x2
Protecto_URC-3740_V1_INT-C_RDN-1241008:URC-7720 TANGO 2 7 NEW_’05 24-10-2008 14:09 Pagina 11
Zobrazit stránku 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 185 186

Komentáře k této Příručce

Žádné komentáře