Universal Remote Control RNC-100 Průvodce řešením problémů Strana 1

P-965A/V Tuner Pre Amplifier

10ENGLISH7. CONNECTING SYSTEM CONTROL• Connect this jack to the DIGI LINK jack of the externalSherwood component that uses the DIGI LINK II or IIIremo

11ENGLISH9. CONNECTING MULTI-ROOM SYSTEM KIT• The multi-room system kit(sold separately ) is essential for operation from a remote location .For infor

10. CONNECTING PC FOR UPGRADES• This unit incorporates USB as well as RS-232C terminalthat may be used in the future to update the operatingsoftware s

13ENGLISHFront Panel Controls1. POWER switch2. STANDBY button/indicator3. DECODING MODE button4. STEREO button5. DIGITAL/ANALOG button6. PURE AUDIO bu

ENGLISH14󳂮FLUORESCENT DISPLAY1. CHANNEL indicators2. PCM SIGNAL indicator3. SURROUND MODE indicators4. TAPE MONITOR indicator5. DIRECT indicator6. STE

ENGLISH15Universal Remote ControlsThis universal remote control can operate not only this unit but also most popular brands of audio and video compone

ENGLISH16󳂮FUNCTION TABLE of the NUMBERED BUTTONS.<POWER ON><STANDBY><CHANNEL SELECTOR><CH LEVEL/ADJUST UP( )><CH LEVEL/A

ENGLISH17ContinuedPOWER-------PLAYFORWARD SKIPREVERSE SKIPFORWARD SEARCHREVERSE SEARCHPAUSERETURNSTOPCURSOR CONTROLENTER/SELECT 0~9DISPLAY-SETUPTITLEA

ENGLISH18LOADING BATTERIESOPERATING COMPONENTS WITH REMOTE CONTROL12• When operating a Sherwood CD player or tape deckusing the system remote control,

19ENTERING A SETUP CODE• This remote control can control up to ten different components.• Before operating audio and video components using the remote

2ENGLISHIntroductionREAD THIS BEFORE OPERATING YOUR UNIT: TO REDUCE THE RISK OFELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NOUSER-SERVICEABLE PARTSI

ENGLISH20󳀏The code is saved and the Pre-PROgramming modeis resumed.󳀏When you do not want to save the code, select theEXIT on the LCD screen or press t

ROOM 2 Remote ControlsThis remote control unit is an additional remote control unit for the ROOM 2 source playback only.• You can use the ROOM 2 funct

ENGLISH22LISTENING TO A PROGRAM SOURCEOperationsBefore operationSelect the desired input source.3• Enter the standby mode.• The STANDBY button lights

ENGLISHOperate the selected component forplayback.5Select the tone mode as desired.7Select the digital or the analog input asdesired.4 At the tone def

ENGLISH24• “MUTE” lights up.• To resume the previous sound level, press the buttonagain.• Ensure that the HEADPHONE SELECTOR button isset to the speak

ENGLISH DTS Digital Surround DTS Digital Surround(also called simply DTS) is a multi-channel digital signal format which can handle higher datarates

ENGLISH Dolby Pro Logic IIx surroundDolby Pro Logic IIx decodes all stereo (2 channel ) and 5.1channel sources and extends to 7.1channel surroundplay

ENGLISH27For your reference, the sound from each channel can be reproduced according to the surround modes as follows:(*): Depending on the subwoofer

ENGLISH28ENJOYING SURROUND SOUND• Surround sound effect will not work properly if the signal passes through a graphic equalizer.Please refer to your e

ENGLISHContinued29󳂮󳂮To enjoy Dolby Pro Logic IIx surround even while playing in a surround mode.• Select the desired Dolby Pro Logic IIx mode.• Each t

3ENGLISHCONTENTS• IntroductionREAD THIS BEFORE OPERATING YOUR UNIT | 2• System Connections | 4• Front Panel Controls | 13• Universal Remote Co

ENGLISH30• This mode creates a virtual surround sound field using as few as two front speakers, allowing you to experiencelistening from 5.1 channel s

ENGLISHSTANDBYPOWER ONMAINPAGEFAVMUTECH.SETVOLRETURNDISPMIOSD/MENU1STEREOCH/ADJUST234567890ENTM2M3DSPDECODEDSPRNC-510orMULTI CONTROLDOWNUPCH/ADJUST31E

ENGLISH32Adjust the level of the selected channel asdesired.2Repeat the above steps ① and ② to adjusteach channel level.3STANDBYPOWER ONMAINPAGEFAVMUT

ENGLISH33LISTENING TO RADIO BROADCASTSAuto tuning• Auto presetting function automatically searches for FM stations only and store them in the memory.•

ENGLISHRepeat the above steps ① to ③ tomemorize other stations.4• When using the NUMERIC buttons on the remotecontrol.Examples) For “3” : For “15”

ENGLISH• The unit will start scanning the stations in the presetsequence and each station is received for 5 seconds.• At the desired station, press t

ENGLISH36LISTENING TO RDS BROADCASTS(FM ONLY)RDS(Radio Data System) is a method for sending information signals together with the transmitter signals.

37ENGLISH• Use this function to automatically search and receivethe desired program type while listening to a RDSstation.• Program type is displayed a

ENGLISH38• Use this function to automatically search and receivethe traffic announcement while listening to trafficprogram.In the TP mode.• Traffic pr

ENGLISH39RECORDING• The analog signals from the 8 CH DIRECT inputs as well as the digital signals from DIGITAL inputs or USB can be heard butcannot be

IN3 IN2 IN1RS-232CIN1 IN2COMPONENTAUXTAPECDPHONOSWFRONTSURR.SURR.BACKCENTEROPT IN4OPT IN3USBOPR.SVC.OPT IN2OPT IN1COAX IN1COAX IN2IROUTYCBCRYCBCRYCBCR

ENGLISH40DIGITAL AUDIO RECORDING WITH MD RECORDERFor digital recording, select the desireddigital input as recording signal input.2Select a desired in

ENGLISH41OTHER FUNCTIONS• This function compresses the dynamic range ofpreviously specified parts of the Dolby Digital soundtrack(with extremely high

ENGLISH42Select the desired input source to enter itslabel.1Press the LABEL button to enter the labelinput mode.Example ) When selecting VIDEO 1.2Sele

ENGLISH43ROOM 2 SOURCE PLAYBACK When using the ROOM 2 remote control unit• You can use the ROOM 2 function with the ROOM 2remote control unit more con

44ENGLISHUsing the OSDCURRENT STATUS DISPLAYThis mode shows the status corresponding to each operation.• The on-screen display will automatically disa

45ENGLISHSelect the desired menu using the CURSORUP(▲)/DOWN(▼) buttons.2Confirm your selection.3• The selected category or item will provide the neede

46ENGLISH• After you have installed this unit and connected all the components, you first perform the speaker setup settings for theoptimum sound acou

47ENGLISHRepeat the above steps ② and ③ until the speakers are all set to the desired mode.4Press the CURSOR UP(▲)/DOWN(▼) buttons to select the SPEAK

48ENGLISHSTANDBYPOWER ONMAINPAGEFAVMUTECH.SETVOLRETURNDISPMIOSD/MENU1STEREOCH/ADJUST234567890ENTM2M3DSPDECODEDSPRNC-510STANDBYPOWER ONMAINPAGEFAVMUTEC

49ENGLISH󳂮Note :• When “S/B CH” is set to “2 CH” on the SPEAKERCONFIGURATION menu, the SUBWOOFERcannot be selected.• Depending on your subwoofer type

5ENGLISHAUXTAPECDPHONOLRAUXOUTTAPEOUTTAPE MONITORTape deck, MD recorder, etc.AUDIOINRLAUDIOOUTRLPHONOTurntable with MM type cartridgeGNDAUDIOOUTRLAUXC

50ENGLISHPress the CURSOR LEFT(◀)/RIGHT(▶)buttons to select the desired crossoverfrequency.2• You can select the desired within 40~120 Hz in 20 Hzinte

51ENGLISH• Each time these buttons are pressed, “◀” and “▶”are moved to the corresponding DIGITAL IN.• You should assign the connected DIGITAL INs to

52ENGLISH• Each time these buttons are pressed, the modes changeas follows:STANDBYPOWER ONMAINPAGEFAVMUTECH.SETVOLRETURNDISPMIOSD/MENU1STEREOCH/ADJUST

53ENGLISH• Each time these buttons are pressed, the videoinput source changes.STANDBYPOWER ONMAINPAGEFAVMUTECH.SETVOLRETURNDISPMIOSD/MENU1STEREOCH/ADJ

54ENGLISHSTANDBYPOWER ONMAINPAGEFAVMUTECH.SETVOLRETURNDISPMIOSD/MENU1STEREOCH/ADJUST234567890ENTM2M3DSPDECODEDSPRNC-510VIDEO 1 :VIDEO 2 :VIDEO 3 :VIDE

55ENGLISH• To turn on the component connected to DC TRIGGER OUT 2 jack when the desired input source is selected,you should link DC TRIGGER 2 with the

56ENGLISH• Each time these buttons are pressed, the digital re-mastering mode changes as follows:On : Select this to process the input signal digitall

57ENGLISHWhen selecting the DECODING MODE, SURROUND MODE, DYNAMIC RANGE• Each time these buttons are pressed, “◀” and “▶” aremoved to the correspondin

58ENGLISH󳂮When the SURROUND MODE is selected• Depending on the input signal format and the selected decoding mode, you can select the desired surround

59ENGLISHSTANDBYPOWER ONMAINPAGEFAVMUTECH.SETVOLRETURNDISPMIOSD/MENU1STEREOCH/ADJUST234567890ENTM2M3DSPDECODEDSPRNC-510PANORAMA :CENTER WIDTH +----

6ENGLISH• The jacks of VIDEO 1 / VIDEO 2 may also be connected to a DVD recorder or other digital video recordingcomponent. For details , refer to th

60ENGLISH• Each time these buttons are pressed, the modechanges as follows :CALL : Select this to recall the channel levelsmemorized into preset memor

61ENGLISH• Each time these buttons are pressed, “▶” is movedto the corresponding channel.󳂮Note :• Depending on the speaker settings such as “None”and

62ENGLISHRepeat the above steps ② and ③ until each level is adjusted as desired.4• Each time these buttons are pressed, “▶” is moved tothe correspondi

63ENGLISH• The ROOM 2 function allows enjoying one source in the main room while playing another in a different room at the same time.• The analog sig

ENGLISH64• Each time these buttons are pressed, the ROOM 2FEED mode is changed to “On” or “Off”.• When the ROOM 2 FEED mode is set to “Off”, theROOM 2

ENGLISH65Troubleshooting GuidePROBLEM POSSIBLE CAUSE REMEDYNo powerNo soundNo sound from the surroundspeakersNo sound from the centerspeakerNo sound f

󳂮 PRE AMPLIFIER SECTION● Analog Audio• Total harmonic distortion, output 1 V, 1 kHz | 0.05 %• Intermodulation distortion60 Hz : 7 kHz = 4 : 1 SM

P-9655707-04747-002-0A/V Tuner Pre Amplifier

7ENGLISH4. CONNECTING DIGITAL INs and OUTs• The OPTICAL and the COAXIAL DIGITAL OUTs of thecomponents that are connected to CD, AUX and VIDEO1~ VIDEO

ENGLISH86. CONNECTING PREOUTs• Connect the PREOUT jacks to the powered speakers or the power amplifiers connected to speakers respectively.• We recomm

9ENGLISHIdeal speaker placement varies depending on the size of your roomand the wall coverings, etc. The typical example of speaker placementand rec